Filter
Top Products
38
Self-timer( ) / Right( ) button
When the menu is displayed on the LCD monitor, pressing the Right button makes
the cursor shift to the sub menu.
When the menu is not displayed on the LCD monitor, the RIGHT button operates as
the Self-timer( ) button. This function is used when the photographer would also
like to be in the image.
Selecting the self-timer
1. Rotate the mode dial to the STILL IMAGE/ MOVIE CLIP
mode.
2. If the self-timer indicator is displayed on the LCD monitor by
pressing the self-timer button, the setting is completed.
3. Pressing the shutter button will allow an interval of ten
seconds before the image is taken.After that, the self-timer is
canceled.
Used for confirming data that is changed by using / / / buttons.
INFORMATION
The default is OFF.
The self-timer LED lamp(red) and the self-timer indicator on the LCD monitor will blink for 10
seconds after the self-timer button has been pressed.
- For the first seven seconds, the LED blinks at one second intervals.
- For the final three seconds, the LED blinks quickly at 0.5-second intervals.
If you operate the Power switch, Mode dial or Shutter button during the self-timer operation,
the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
OK button
Selecting the self-timer