Filter
Top Products
78
Sound
A beep will sound when you press the camera button and an error occurs.
You can check the camera condition with this function.
You may adjust the LCD brightness.
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3]
menu will display.
2. Select the [SETUP 3/3] menu by pressing the RIGHT button
twice.
3. Select the [SOUND] menu by pressing the UP/DOWN
button.
4. Press the RIGHT button and the cursor will shift to the
[SOUND] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN
button.
Selecting [OFF] : The sound function is not activated.
Selecting [LOW] : The low sound will be activated.
Selecting [NORMAL] : The normal sound will be activated.
Selecting [HIGH] : The loud sound will be activated.
6. Press the OK button to confirm the setting.
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3]
menu will display.
2. Select the [SETUP 3/3] menu by pressing the RIGHT button
twice.
3. Select the [LCD] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [LCD]
sub menu.
5. Select the desired sub menu by pressing the UP/DOWN
button.
LCD brightness range : -3 ~
NORMAL
~ +3
6. Press the OK button to confirm the setting.
LCD brightness
CHANGE :
SETUP 3/3
SOUND NORMAL
LCD NORMAL
VIDEO OUT NTSC
QUICK VIEW 01 SEC
CHANGE :
SETUP 3/3
SOUND NORMAL
LCD NORMAL
VIDEO OUT NTSC
QUICK VIEW 01 SEC
BACK: SET:OK
SETUP 3/3
SOUND
BACK: SET:OK
SETUP 3/3
LCD
NORMAL
OFF
LOW
NORMAL
HIGH