Filter
Top Products
3-1
E
2-9
Chapter 3 Setup Menu Overview
In this chapter, we will look over the Setup Menu of the
SCC-C6403, First we'll look over the overall structure of the
Setup Menu, and then we'll look at the functions of each menu.
7. [Figure 7] Match the 3 holes on the
back of the CAMERA and the
CONNECTOR and turn it left about
15 degrees.
(Check the sound of LOCKING
and that the LEVER-LOCKING
is in place)
* Use the screws (BH M3 x L8) to
connect the CAMERA and the
ADAPTER so they don't move.
[Figure 7]
8. [Figure 8] Assemble the
COVER-BODY onto the DOME.
[Figure 8]
5. [Figure 5] Match the
BRKT-ANCHOR and CAMERA
ADAPTER and use 4screws
(PH M4 x 8) to assemble them.
[Figure 5]
6. Pull the safety wire from the case
body, and assembly it to the camera
holder.
[Figure 6]
00570A-SCC-C6403-ENG 8/17/06 1:51 PM Page 2-9