Filter
Top Products
39
40
Those 3 types are like the following:
1. Window Type
The selected area is displayed with a box. The motion can be detected for the area only. You can
manually set the motion detection area. You can use the UP/DOWN/LEFT/RIGHT Setup switch to
set the size. To move to POSITION, press the switch. After setting the position using the UP/DOWN/
LEFT/RIGHT Setup switch, press the Setup switch to move to the upper menu. To set the size and
position for AREA, select any of 0, 1, 2, and �.
Note
The selected window for AREA is displayed in white and the unselected one is displayed in black.
2. Label Type
The box-typed motion detection area is prexed. The detected area is displayed with size and position
changing. You cannot change AREA because it is displayed with “---.”
SCC-C7433_7435-Eng.indd39 2008-05-20오전10:49:47