Filter
Top Products
English _49
DISC UNFINALIZE
( ( ))
• This function works only in the Record mode.
page 21
• If a DVD-RW disc had been finalized in the VR mode or Video mode, you can unfinalize the disc for further
recording. When unfinalizing, there should be enough power in the battery. If the AC power adaptor is to be used,
make sure that the jack is properly connected.
1. Slide the POWER switch downwards to turn on the power.
page 21
2. Set the Storage mode switch to DISC. (SC-DX103/ DX105 only)
page 30
3. Press the MENU button, then move the Joystick right or left to select “Disc Manage.”
4. Move the Joystick up or down to select “Disc Unfinalize,” then press the Joystick.
• You can simply unfinalize the disc using the FINALIZE button on the DVD camcorder.
• Disc information will appear.
5. Move the Joystick to select “Execute,” then press the Joystick.
• To exit, use the Joystick to select “Back,” the press the Joystick.
6. The message “Make the disc recordable?” will appear. Move the Joystick right or left
to select “Yes,” then press the Joystick.
• The message showing that the disc is being unfinalized will appear, and the disc will
be unfinalized.
WARNING
• The unfinalize function is not available when the battery level is less than ( ).
• During unfinalizing, do not cause impact or vibration to your DVD camcorder.
This could cause a malfunction.
Now Unfinalizing...
Avoid Shock & Vibration
Now Unfinalizing...Now Unfinalizing...
Avoid Shock & VibrationAvoid Shock & Vibration
Unfinalize
Disc Name JAN/01/2008
Disc Type DVD-RW [Finalized]
Disc Format VR Mode
Used 0:10:00
Free 0:20:00 [Fine]
Back
Execute
Disc Manage
Disc Finalize
Disc Unfinalize
Disc Format
Disc Info
STBY 0:00:00 [30 min]
(AD68-02550A) SC-DX100_ENG_IB.indb 49 2008-03-10 ¿ÀÈÄ 4:18:10