Filter
Top Products
COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual
1918
Please connect the video output terminal located on the back of the camera to
the monitor.
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set
and select 75Ω for the Intermediate device as shown in the picture below.
Each model has a different power input specification.
Please check the model type and standard power requirement before
connecting to power.
The recommended adaptor specification
for SDN-550N/SDN-550P is AC
24V/500mA or DC 12V/500mA.
Use AC230V, 50Hz power source
For SDN-550PH.
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to
the camera may affect the performance of the camera.
Standard voltage for camera operation : DC 12V±10%
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
AC/DC Power Type
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size(AWG) #24(0.22mm
2
) #22(0.33mm
2
) #20(0.52mm
2
) #18(0.83mm
2
)
Resistance value(Ω/m) 0.078 0.050 0.030 0.018
Voltage drop(V/m) 0.028 0.018 0.011 0.006
High Voltage Type (AC230V, 50Hz)
Connection
Connecting to Monitor
CCD Camera Monitor
CCD Camera
Intermediate End monitor
Connecting to Power
An adaptor that meets the standard requirement must be used.