Filter
Top Products
COLOR CCD CAMERA User’s Manual
29
COLOR CCD CAMERA User’s Manual
28
HIGH/MIDDLE/LOW : You can adjust the sensitivity of Backlight Compensation.
OFF BACKLIGHT function does not operate.
1. Please position the arrow to point to 'AGC' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button. As the level of gain increases, the screen gets brighter and the level
of noise also increases.
HIGH : The gain increases or decreases within the range of 6dB ~ 34dB.
NORMAL: The gain increases or decreases within the range of 6dB ~ 30dB.
OFF : The gain is fixed at 6dB.
3. Please press the SETUP button. The
BRIGHTNESS can be adjusted within the range
of 1~70.
4. Please press the SETUP button when all the
settings are complete.
AGC (Auto Gain Control)
BACKLIGHT ON BACKLIGHT OFF
Operating Your Camera
SETUP
1.
LENS DC
2.SHUTTER - --
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.
AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF
8.SPECIAL
9.EXIT
The background noise in the low light level decreases automatically as the level
of gain changes.
1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
SSNR (Samsung Super Noise reduction)
OFF : There is no reduction in noise level.
LOW : There is a small reduction in noise level with almost no ghost image.
MIDDLE : The most effective mode. There is a sufficient reduction in noise levels
without causing much ghost imaging.
HIGH : The level of noise is reduced greatly, however there is an increase
in ghost imaging.
• When AGC is turned off, SSNR does not operate.
Note
SETUP
1.
LENS DC
2.SHUTTER - --
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.
AGC NORMAL
6.
SSNR LOW