Filter
Top Products
Installation
COLOR DOME CAMERA User’s Manual
21
COLOR DOME CAMERA User’s Manual
20
Adjusting varifocal lens zoom and focus
1) Unlock the zoom (or the focus) handle to release it
2) Adjust the zoom (or the focus) handle by moving it to WIDE (NEAR) or TELE (FAR)
position.
3) After adjustment, tighten the zoom (or the focus) handle, taking care that the
adjusted position does not change.
Focus handle
Zoom handle
Please connect video output terminal located on the back of the camera to the
monitor
• As the connecting method varies with the instruments, refer to the manual
supplied with the instrument.
• If necessary, you can connect the monitor to the REMOTE jack on the back of
your camera.
• Only connect the cable when the power is turned off.
• Set the 75Ω / Hi-Z selection switch as shown below if you have an
intermediate device.
Connecting to a Monitor
CCTV Camera
CCTV Camera
Monitor
Intermediate
End monitor