Filter
Top Products
Camera Operation
COLOR DOME CAMERA User’s Manual
35
COLOR DOME CAMERA User’s Manual
34
5) When a name has been chosen, please select a position for the name display.
Please move the cursor onto 'POS' and then press the SETUP button.
The name will appear at the top left hand
corner.
Please find the position you wish to display the
name by using the 4 directional buttons,
and then press the SETUP button.
6) Please select 'END' and then press the SETUP button to complete ID input.
to Locate, then SETto Locate, then SETto Locate, then SET
FRONT DOOR
to Locate, then SET
FRONT DOOR
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-. 123456789
CLR POS END
COLOR (Electronic DAY & NIGHT)
- AUTO: This camera has a function which electronically changes to the appropriate
mode for daytime or night-time. The COLOR mode is operated for daytime,
and it converts to BW mode for night-time.
- ON: The color mode is selected electronically.
SYNC : In LINE-LOCK mode, it synchronizes the video signal between cameras
without a synchronous generator.
- INT : Internal synchronization - LL : External line-lock synchronization
• If you choose ‘LL’, you can adjust the desired phase. Press the SET button.
• You can adjust the desired phase from 0 to 359.
•If AGC is OFF, you can’t select AUTO mode.
•When an infrared light is used, there may be a problem with focusing and COLOR
(DAY & NIGHT).
Notes
• ‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power.
Notes