Filter
Top Products
Name and Function of Each Section
COLOR DOME CAMERACOLOR DOME CAMERA User’s ManualUser’s Manual
1312
Zoom Handle
To adjust zoom magnification by turning.
SETUP button
Used for the menu display or function settings.
Left button Right button
Used when changing item values, by moving the cursor to the left or right on the
menu screen
Up button Down button
Used when changing item values, by moving the cursor to the up or down on the
menu screen
Service connector for the easily install the camera
A terminal can be connected to an LCD monitor,
allowing the operator to easily adjust
the camera angle within the monitoring
range during its installation.
Power input jack
BNC jack
Dome cover
Dome cover is made of high sensitivity poly carbonates
Service/ Monitor Cable
External Viewer (not supplied)
Installation
Camera Installation
• The product has been designed for installation on a ceiling. If the ceiling is not
strong enough to support the camera, it may fall. Take the necessary steps to
strengthen the installation surface before installing the camera.
Notes
Remove the dome cover by turning it counter-clockwise as shown below and
then follow the steps for installation.
Camera body
Dome cover
Unlocking direction
(Counterclockwise)
Locking direction
(Clockwise)
* To install the dome cover on the camera
body, turn the latches in locking direction as
shown in the figure 1.
Latch
Latch
Locking direction
[Figure-1]