Filter
Top Products
Eng-101
Step-by-Step Setup Example of IP Router
Linksys model WRT54G
1. Click the “Application and Gaming” tab.
2. Click “Port Range Forward”.
3. Port forwarding
Row #1 :
Application : Set this to “HTTP”
Start and End : Set both to “From 10000 to 65535”
Protocol : Select “TCP”
IP Address : SETUP MENU -> 7. NETWORK SETUP -> Check IP from network
status to apply it identically to Private IP after DHCP setup.
(Eng-32 Setup)
*
It is not in use by any other device connected to the IP Router including the Local PC.
Enable : Leave this “checked”
4. Click “Save Settings”
5. Close browser window.
SMO-151QN