Eng-41
4) When the PPPoE (ADSL) type in the User Name and Password (and Confirm Password)
given to you by the ADSL Service Provider.
CAUTION
In case of using ADSL (ISP-internet service provider) you must type correct User Name
and Password by ISP to connect to SMO-151QN. If you type incorrect User Name or
Password, you can not see the image transferred from SMO-151QN.
5) USER ID and PWD (Password) can be 40 digits maximum. Only the Arabic numerals,@
and small characters can be used.
Please that capital letters are not supported when you get USER ID and PWD (Password)
from ADSL Service Provider.
6) DNS 1 and DNS 2 will be automatically set to DNS as shown above.
7) Use ¥ /
KEY
to change it.
8) After setting, move to the main screen by using the MENU button.
9) Set values will be stored as shown below. It takes 2 or 3 seconds.
On completion of setting to PPPoE(ADSL)setup, the screen, [P] is displayed.
If the network connection is cancelled or cut, [P] starts blinking.
06/01/03 13:14:00
PPPoE
...
ACCESS
DNS 1 168.126.63.001
DNS 2 168.126.63.002
USER ID
********
USER PWD
********
06/01/03 13:14:00
NETWORK SETTING
ID and PASSWORD can be inputted to 40 characters in the maximum.
[P] 13:14:00
CAM1