Samsung SMO-XAAV Security Camera User Manual


 
Eng-32Eng-32
If the time is set for each camera channel by using /KEY, each camera picture will be displayed for
the set time and switched to the next picture automatically.
3-4) DISPLAY MENU function setting
Function: Allows users to select the color and ON/OFF of borderline at QUAD DISPLAY.
Setting method: Move to #4. DISPLAY SETTING MENU by using/KEY at SETUP MENU,
then press the ENTER SWITCH to display the OSD as shown in the figure below. (The figure
shows the initial setting status.)
Move to each item by using /KEY, and using ¥/KEY set value.
1) BORDER item determines whether or not boarder line is displayed at QUAD DISPLAY MODE.
(ON: Displays the boarder line, OFF: Does not display the boarder line)
2) BORDER COLOR item sets boarder line color among three colors: Black, White, Gray.
3) PIP POSITION item sets the location of sub picture at PIP DISPLAY. (T-LEFT: Upper part of left
side, T-RIGHT: Upper part of right side, B-LEFT: Lower part of left side, B-RIGHT: Lower part of
right side)
4) NETWORK STATUS determines the display of [S], [D], [P] displayed at the left of top on the
screen according to status of NETWORK.
Refer to 3-7) NETWORK SETTING function and setting method (Eng-35) for the respective
detailed status.
(ON: Displays the NETWORK STATUS, OFF: Does not display the NETWORK STATUS)
06/01/03 13:14:00
BORDER ON
BORDER COLOR GRAY
PIP POSITION B-RIGHT
NETWORK STATUS ON/OFF
DISPLAY SETTING