Filter
Top Products
Eng-28Eng-28Eng-28
2-8) PIP- KEY
Can be used to see the main screen while Single screen is displayed. The main screen can be changed
and transfered to another channel while PIP is working. Please refer to "CHAPTER 4. DISPLAY
MODE setting method(Eng-86)" for PIP function and details.
2-9) FREEZE- KEY
This key allows users to see a target camera picture at PAUSE MODE. If users select the camera with
the ▲/▼ KEY, and press the FREEZE BUTTON, the OSD “ I I ” will be displayed on pause picture
from the camera. Other FRONT KEY input is ignored at FREEZE MODE, and other FRONT KEY
inputs will be available only after the FREEZE MODE is cancelled.
2-10) SEQUENCE- KEY
It makes a picture switch sequentially. This means that display the picture will be displayed during the
DWELL TIME pre-set at the DWELL MENU of SETUP MENU, and switch the picture automatically
as a pre-set sequence. Please refer to 3-3) DWELL TIME MENU function and setting (Eng-35) for
details of DWELL TIME setting.
2-11) ZOOM- KEY
It zooms a part of a picture doubling it in the display. If the ZOOM BUTTON is pressed, zoom area
will be displayed. Users can move to a target area by using ▲/▼ KEY at this time. If ¥ENTER
SWITCH is pressed at the target area, the area will be displayed with 2 times larger.
2-12) POWER- KEY
It turns ON/OFF the power of the monitor and camera at the same time.
In case the monitor power is ON, LED of monitor front is lit and the monitor is displayed in color bar
pattern. For a while, the OSD “SYSTEM INITIALIZED...” will be displayed with blue pattern during
twenty eight second - s or so.