Samsung SNB-7002 Security Camera User Manual


 
Dwell time : This is the time while each applicable lighting condition is kept in
order to enable the switch between day and night modes.
Duration : Specify the time interval of lighting at which the sequence operation is
triggered.
Sharpness mode : Adjust the overall sharpness of the image.
If selecting <On>, you can adjust the sharpness of the image.
Sharpness level : The higher the level is, the sharper and clearer the outline of the
image becomes.
Gamma : Adjust the contrast of the image.
Color level : Adjust the color level of the image.
Alarm in : Set the image to Color or B/W depending on the Open/Close state of
the alarm sensor.
If the Day & Night mode is set to Externel B/W, the alarm-in function of the event-alarm input page
will be disabled.
OSD Setup
1. Select <OSD>.
2. Select each item and set it properly.
Camera title : Specify whether or
not to display the camera title on the
screen.
You can enter up to 15 characters for the title.
Camera title position X, Y : Specify the coordinates where the camera title is
displayed on the screen.
Time OSD Setup
1. Select <Time OSD>.
2. Select each item and set it properly.
Time display : Specify the use of time
display on the screen.
Date format : Specify the date format
that will be displayed on the screen.
Time position display X, Y : Specify the position of time display on the screen.
Display weekday : Specify the use of date display date on the screen.
English _87
SETUP SCREEN