Filter
Top Products
22_ camera setup
camera setup
According to the specifi ed recording mode,
select a WHITE BAL mode with necessary
options.
BRIGHTNESS : Specify a brightness level
triggering the switch from DAY to NIGHT
mode.
MODE : According to the selected mode, you
can adjust the RED and BLUE color level.
RED : Adjust the strength of the red color.
BLUE : Adjust the strength of the blue
color.
R-GAIN/B-GAIN : Specify the current color temperature manually.
You can set the R-GAIN, and B-GAIN value only in AWC mode.
DIGITAL ZOOM
You can set the digital zoom factor and position.
When the zoom factor and position are defined, the digital zoom function will operate.
If you set the digital zoom to a larger factor than the actual enlargement for compensation, the DIS
function will be disabled.
DETAIL
You can adjust the vertical and horizontal sharpness, respectively.
AGC COLOR SUP
This will adjust the color scheme according to the AGC value.
REVERSE
This will reverse the signal left to right, top to bottom, or a combination of the preceding.
POSI/NEGA
This will display the video brightness signal either normally or reversely.
PIP
You can view a main image with a sub image on the same screen.
3.
y
y
-
-
-
WHITE BAL
WHITE BAL
DAY/NIGHT NIGHT
DAY/NIGHT NIGHT
BRIGHTNESS MID
BRIGHTNESS MID
MODE
AWC
RED
RED
[
[
00
00
]
]
----
----
I
I
----
----
BLUE
BLUE
[
[
00
00
]
]
----
----
I
I
----
----
R-GAIN
R-GAIN
[
[
0040
0040
]
]
B-GAIN
B-GAIN
[
[
0133
0133
]
]