Filter
Top Products
installation & connection
24_ installation & connection
Flushed installation on the ceiling
Using the provided template, drill a hole for the camera unit and fi xing holes (diameter
5mm, more than 35mm deep) on the ceiling. Insert the plastic anchors (HUR-5) fully
into the fi xing holes.
Separate the dome cover and case.
For separating dome cover and case, refer to the steps 1 and 2 of “Installing on
the ceiling directly”.
Connect power and video cables and arrange cable running not to damage or
squeeze them.
Remove the case assembly screws from the
camera module.
Insert the camera module into the camera
hole, and install it by fastening the Tapping
Screws (TH, M4xL30) by matching the fi xing
holes (3 places).
Assemble the Dome Cover.
Refer tot the step 6 of “Installing on the
ceiling directly".
1.
2.
3.
4.
5.
6.