Filter
Top Products
ENGLISH
3636
Basic Recording
✤ The REC SEARCH function works only in <Camera> mode.
➥page 19
✤ To be used to review previously recorded images or to find a point to
record a new image in the STBY mode.
Record Search (REC SEARCH)
1. Set to STBY mode by pressing [Start/Stop] button.
2. [REC SEARCH -] enables you to play the recording
backwards and
[REC SEARCH +] enables you to play it forwards,
as long as you keep each button pressed down.
■
If you press the [REC SEARCH -] button in
STBY mode, your Camcorder will play
in reverse for 3 seconds and return to the
original position automatically.
[ Note ]
■
Mosaic shaped distortion may appear on the screen
while in Record Search mode.
■
Pressing [Start/Stop] button after REC SEARCH
will overwrite the images recorded after that point.
✤
<Camera> < >
➥
19
✤
(REC SEARCH)
1. [Start/Stop]
2. [REC SEARCH -]
[REC SEARCH +]
■
STBY( ) [REC
SEARCH -]
■
■
[Start/Stop]
COLOR NITE
L
I
G
H
T
COLOR NITE
L
I
G
H
T
Reviewing and Searching when Recording (REC SEARCH)
, ( )
When a cassette is loaded and the Camcorder is left in the STBY
mode for more than 5 minutes without being used,
it will switch off automatically.
To use it again, press the [Start/Stop] button or set the [Power]
switch to [Off] and then back to [CAMERA].
This auto power off feature is designed to save Battery power.
[Start/Stop] [Power]
[Off] [CAMERA]