ENGLISH
6565
Connecting to a TV which has no Audio/Video Input
Jacks
✤ You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR
with the Multi Cable.
■
The yellow jack: Video
■
The white jack: Audio(L) - Mono
■
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the [Power] switch to [PLAYER].
4. Set the [Mode] switch to [TAPE].
(VP-D363(i)/D364W(i)/D365W(i) only)
5. Turn on both the TV and VCR.
■
Set the input selector on the VCR to
Line.
■
Select the channel reserved for your
VCR on the TV set.
6. Play the tape.
Playback
1. Connect a power source and set the [Power] switch
to [PLAYER].
2. Set the [Mode] switch to [TAPE].
(VP-D363(i)/D364W(i)/D365W(i) only)
3. Insert the tape you wish to play back.
4. Using the [
œœœœ
(REW)] /[
√√√√
(FF)] buttons, find the
first position you wish to play back.
5. Press the [
√√
/❙❙ (PLAY/STILL)] button.
■
The images you recorded will appear on the TV
after a few seconds.
■
If a tape reaches its end while being played back,
the tape will rewind automatically.
[ Notes ]
■
The playback mode (SP/LP) is selected automatically.
■
If the VCR has an S-Video input terminal, you may use S-Video
connector for better quality.
■
The S-Video connector transmits video only. Connect audio cables
for sound.
■
If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
A/V
✤
A/V
1.
■
:
■
: -
■
:
2. VCR
3. [Power] [PLAYER]
4. [Mode] [TAPE] (
VP-D363(i)/D364W(i)/D365W(i)))
5.
VCR
■
VCR Line
■
1. [Power] [PLAYER]
2. [Mode] [TAPE] ( VP-
D363(i)/D364W(i)/D365W(i))
3.
4. [
œœœœ
(REW)] /[
√√√√
(FF)]
5. [
√√
/
■■
(PLAY/STILL)]
■
■
[ ]
■
(SP/LP)
■
VCR S-Video , S-Video
■
S-Video
■
(Audio L)
Playback
P
L
A
Y
E
R
C
A
M
E
R
A
Q
U
I
C
K
M
E
N
U
AV/ S
Antenna
Multi Cable
Signal flow
TV
VCR
Camcorder
Multi Cable
C
A
M
E
R
A
C
A
M
E
R
A
P
L
A
Y
E
R
P
L
A
Y
E
R