Samsung VP-D65 Camcorder User Manual


 
31
ENGLISH
CZECH
Techniky z‡znamu
ENGLISH
- The LCD ADJUST function works in CAMERA and PLAYER mode.
Please see page 27.
LCD ADJUST
- The DIS function works in CAMERA mode only.
- DIS(Digital Image Stabilizer) is a handshake compensation function
that compensates for any shaking or moving of the hand holding the
camcorder (within resonable limits).
- It provides more stable pictures when:
Recording in the Zoom in mode
Recording a small object close-up
Recording and walking at the same time
Recording through the window of a vehicle
1. Set the camcorder to CAMERA mode.
2. Press the MENU ON/OFF button.
- The menu list will appear.
3. Using the , buttons, highlight DIS.
4. To activate the DIS function, press the ENTER button.
- The DIS menu is changed to ON.
- If you do not want to use the DIS function,
set the DIS menu to OFF.
5. To exit, press the MENU ON/OFF button.
Reference - It is recommended that you deactivate the handshake
compensation function when using a tripod.
- The DIS function will not operate in the PHOTO or
GHOST(in DSE) mode.
- If you use the DIS function, the picture quality may
deteriorate.
- If you see the flickering image when you use the
DIS function under the indoor fluorescent light in
NTSC area, you can get a stable image as changing
the SHUTTER SPEED from AUTO to 1/100.
(see page 39)
Advanced Recording
DIS (Digital Image Stabilizer)
Nastaven’ LCD monitoru
Ð Funkce LCD ADJUST (Nastaven’ LCD monitoru) je dostupn‡ jak v
reìimu Camera, tak reìimu Player. Detailnžjä’ informace viz str. 27.
DIS (Digital Image Stabilizer) Ð Digit‡ln’ stabiliz‡tor obrazu
Ð Tato funkce je dostupn‡ pouze v reìimu Camera.
Ð Funkce DIS kompenzuje lehkŽ chvžn’ zpósobenŽ tÞesouc’ se rukou pÞi
nat‡‹en’ (oväem jen do ur‹itŽ m’ry).
Ð Vyuìit’ tŽto funkce je v n‡sleduj’c’ch pÞ’padech:
PÞi z‡znamu v reìimu Zoom
PÞi z‡znamu velmi bl’zkùch objektó
PÞi z‡znamu za chóze
PÞi z‡znamu pÞes okno vozidla
1. Nastavte videokameru do reìimu Camera.
2. Stisknžte tla‹’tko MENU ON/OFF.
Ð objev’ se seznam menu.
3. Tisknut’m tla‹’tek , vyhledejte DIS.
4. Tla‹’tkem ENTER aktivujete funkci DIS.
Ð Menu DIS je zmžnžno na ON.
Ð Jestliìe jiì nechcete pouì’vat funkci DIS, nastavte
menu na OFF.
5. Stiskem tla‹’tka MENU ON/OFF ukon‹’te funkci.
Pozn‡mka Ð pokud pouì’v‡te stativ, doporu‹uje se vyÞadit funkci
Digit‡ln’ stabiliz‡tor obrazu z ‹innosti.
Ð funkce DIS nebude fungovat v reìimu PHOTO
nebo GHOST.
Ð jestliìe pouì’v‡te funkci DIS, kvalita obrazu se
móìe zhoräit.
Ð jestliìe pÞi pouì’v‡n’ funkce DIS v‡m pÞi vnitÞn’m
svžtle v oblasti NTSC obraz blik‡, stabiln’ho obrazu
móìete dos‡hnout zmžnou reìimu SHUTTER
SPEED z AUTO na 1/100. (viz str. 39)
(MENU) STBY
0:00:00
DIS.........ON
DIGITAL ZOOM
DSE SELECT
PROGRAM AE
ZERO MEM...OFF
EXIT:MENU
LCD ADJUST