Samsung VP-DX100H Camcorder User Manual


 
59_ English
臺灣
_59
VIEWING PHOTO IMAGES
This function works only in the Play mode.
page 21
You can play back and view photo images recorded on
the memory card.
1. Slide the POWER switch downwards to turn on the
power and open the LCD screen.
Set the Storage mode switch to CARD.
page 30
Adjust brightness or colour of the LCD screen.
page 79
2. Press the MODE button. Use the Joystick to
highlight the photo ( ) tab.
The thumbnail index view of photo images appears.
To change the current thumbnail page, move the
Joystick down to highlight the page bar, then move
the Joystick right or left to select the page.
3. Use the Joystick to select the desired photo image,
then press the Joystick
.
To view the previous image, move the Joystick left.
To view the next image, move the Joystick right.
To search for an image quickly, move the Joystick
right or left and hold. Actually the image number is
changed during search with images not changed.
4. To return to the thumbnail index view, move the
Joystick down.
All the icons disappear or appear when
you press Display ( ) button on the
camcorder.
Loading time may vary depending on
the image size.
Any large-sized image taken with
another device will be displayed as a
thumbnail image.
Set the slide show function for continuous display
.
1. Press the MENU button in the single image display
mode.
2. Move the Joystick right or left to select “Slide Show
Start” then press the Joystick.
The ( ) indicator is displayed. The slide show
will start from the current image.
All images will be played back consecutively for 2~3 seconds each.
To stop the slide show, move the Joystick down or press the
MENU button.
檢視相片影像
此功能僅能在播放模式下操作。
第 21 頁
您可以播放和檢視錄製在記憶卡上的相片影像。
1.
向下滑動
POWER
開關以開啟電源和打開 LCD 螢
幕。
儲存模式
開關設定為
CARD
第 30 頁
調整 LCD 螢幕的亮度或色彩。
第 79 頁
2.
按下
MODE
按鈕。使用
搖桿
以反白顯示相片
( ) 標籤。
會顯示相片影像的縮略索引視圖。
要變更目前的縮圖頁面,可向下移動
搖桿
以反白
顯示頁面列,然後向右或向左移動
搖桿
以選擇頁
面。
3.
使用
搖桿
選擇所需的相片影像,然後按下
搖桿
要檢視上一個影像,可向左移動
搖桿
要檢視下一個影像,可向右移動
搖桿
要快速搜尋影像,可向右或向左移動並按住
搖桿
實際上,在搜尋期間,影像數目會變更,而影像
不變。
4.
要返回縮略索引視圖,可向下移動
搖桿
• 按攝錄放影機上的
顯示
( ) 按鈕時,
所有圖示都會消失或顯示。
• 載入時間將視影像大小而有所不同。
• 任何以其他裝置拍攝的大型影像將顯示
為縮圖影像。
設定連續放映以供連續顯示。
1.
在單一影像顯示模式下按下
MENU
按鈕。
2.
向右或向左移動
搖桿
以選擇
「Slide Show」
「Start」
,然後按下
搖桿
(
) 指示器會顯示。連續放映將會從目前影像
開始。
所有影像將連續各播放 2
~
3 秒鐘。
要停止連續放映,可向下移動
搖桿
或按下
MENU
按鈕。
設定連續放映以供連續顯示。
12/12
100-0002
1
Slide Show
Start
1.
2.

3.
2.
12/12
100-0009
4.
12/12
100-0002
All images will be played back consecutively for 2~3 seconds each.
設定連續放映以供連續顯示。
1.
2.
設定連續放映以供連續顯示。
12/12
100-0002
Eng+Tai_VP.indb 59 2008-03-07 ¿ÀÈÄ 6:26:15