Samsung VP-DX100H Camcorder User Manual


 
使用選單項目
在以下所列情況下建議使用手動曝光:
在使用回光拍攝或背景太暗時。
在反射的自然背景如沙灘上拍攝或在滑雪時。
在背景過暗或主體太亮時。
如果在選擇「
Scene Mode(AE)
」功能時手動變更曝光
值,則會首先套用手動變更。
EASY Q
模式下,此功能將被設定為「
Auto
Anti-Shake(DIS)
當您使用縮放錄製放大的影像時,它將會在錄製的影像中修正模糊度。
設定 內容
畫面顯示
語言
Off
停用功能。
On
對攝錄放影機抖動(尤其是在放大率高時)
造成的不穩定影像進行補償。
簡易拍攝模式會自動將「
Anti-Shake(DIS)
」設定為「
On
.」
在設定「
Anti-Shake(DIS):On
」時,實際運動和螢幕上的
運動可能會略有不同。
即使已設定「
Anti-Shake(DIS):On
,也不能徹底更正大
幅度攝錄放影機抖動。
請用雙手握緊 DVD 攝錄放影機。
在桌面或三腳架(未提供)上使用 DVD 攝錄放影機時,
建議指定「
Anti-Shake(DIS):Off
在使用 34x 或更高放大倍數錄製畫面及在黑暗位置將
Anti-Shake(DIS)
設定為
On
時,影像之後可能會突出。
在此情況下,我們建議使用三腳架(未提供),並將「
Anti-
Shake(DIS)
」設定為「
Off
此功能只能在 DVD 攝錄放影機錄製模式下設定。
68_ English
臺灣
_68
Manual exposure is recommended in situations listed below:
When shooting using reverse lighting or when the background
is too bright.
When shooting on a reflective natural background such as at
the beach or when skiing.
When the background is overly dark or the subject is bright.
If you manually change the exposure value when
Scene Mode(AE)” function is selected, manual
changes are applied first.
This function will be set to “Auto” in the EASY.Q mode.
Anti-Shake(DIS)
When you use zoom to record a magnified subject image, it will
correct fuzziness in the recorded image.
Settings Contents
On-screen
display
Off Disables the function. None
On
Compensates for unstable images
caused by camcorder-shake, particularly
at high magnification.
EASY Q mode automatically sets the “Anti-Shake(DIS)
to “On.”
When “Anti-Shake(DIS): On” is set, there will be a
slight difference between the actual movement and the
movement on screen.
Gross camcorder-shake may not be entirely corrected
even if “Anti-Shake(DIS): On” is set.
Firmly hold the DVD camcorder with both hands.
It is recommended that you specify “Anti-Shake(DIS):
Off” when using the DVD camcorder on a desk or tripod
(not supplied).
When you record pictures with 34x or more magnification
and the “Anti-Shake(DIS)” is set to “On” in dark locations,
after-images may stand out. In this case, we recommend
using a tripod (not supplied) and turning the “Anti-
Shake(DIS)” to “Off.”
This function can be set in the DVD camcorder record
mode only.
using the menu items
Eng+Tai_VP.indb 68 2008-03-07 ¿ÀÈÄ 6:26:44