Filter
Top Products
SETTINGS
Camera setup section
• Internal sync (INT)/Line lock (LL) setting
• Electronic iris (EI)/Auto iris (AI) setting
• Backlight compensation (BLC) setting
• Automatic gain control (AGC) setting
Iris function setting
Use a manual or fixed iris lens and set the lens
aperture to the shortest F stop. Set the EI/AI
switch to EI position.
☞ When using an auto-iris lens (for indoor/outdoor use)
Set the EI/AI switch to the AI position.
Note:
• The electronic iris is suitable for normal indoor use. When the
EI/AI switch is set to the EI position, do not use an auto-iris lens.
• If used under fluorescent light, the image may flicker. In such a
case, change to incandescent lighting or set the EI/AI switch to
the AI position and use an auto-iris lens.
• When shooting bright subjects, pay attention to the light angle in
order to avoid or minimize the smear phenomenon effect.
• If conditions are outside the electronic iris operation range or more
than the maximum illumination, it will cause saturation of the CCD.
In that case, use a manual iris lens.
EI
OFF
OFF
AI
BLC
AGC
INT
LL
EI
AI
L73Q4/US GB 2001, 6, 18
10 English