Sanyo VCB-3444 Security Camera User Manual


 
SPECIFICATIONS
Scanning system : EIA standard
(525 TV lines, 30 frames/sec.)
Interlace : 2:1 interlace
Image device : 1/3 inch solid state image device CCD
Picture elements : 542 (H) x 494 (V)
Effective picture elements : 512 (H) x 492 (V)
Synchronizing system : Internal sync (INT), Line lock (LL)
manually switchable
Resolution : 400 TV lines horizontally, 350 TV lines
vertically
Video output level : 1.0 Vp-p/75 ohms, composite
Video S/N ratio : More than 50 dB
Minimum required
illumination
(incandescent lighting)
: Approx. 0.05 lux with a F 1.2 lens,
Approx. 0.07 lux with a F 1.4 lens
Backlight compensation : Manual ON/OFF switching, zone light
measuring system
(Active when using an auto-iris lens)
Iris function : Manual ON (EI)/OFF (AI) switching
High speed electronic
shutter
: 8 speeds, selectable by switch:
(1/60, 1/100, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000 sec.)
Electronic iris range : 0.07 lux to 42,000 (F 1.4, lens)
0.05 lux to 30,000 (F 1.2, lens)
Flange-back : 12.5 mm ± 0.8 mm
AGC : Manual ON/OFF switching
Gamma correction : γ = 0.45
Lens mount : CS mount
Environmental conditions : Temperature: –10˚C ~ +50˚C
Humidity: less than 90% (no
condensation)
Power supply : 24 V AC, 60 Hz
Power consumption : 4.0 W (with auto iris lens)
3.7 W (without auto iris lens)
Weight : Approx. 560 g (without lens)
SERVICE
This camera is a precision instruments and if treated with care, will
provide years of satisfactory performance. However, in the event of a
problem, the owner is advised not to attempt to make repairs or open
the cabinet. Servicing should always be referred to your dealer or
Sanyo Authorized Service Centre.
L73Q4/US GB 2001, 6, 18
14 English