Filter
Top Products
PARTS NAMES
1 Power indicator (POWER)
Comes on when the power to the camera is on.
2 Camera setup section
• Internal sync (INT)/Line lock (LL) setting
• Electronic iris (EI)/Auto iris (AI) setting
• Backlight compensation (BLC) setting
• Automatic gain control (AGC) setting
3 Line phase adjustment volume (PHASE)
When using two cameras or more, the image on the monitor may roll vertically when switching sources. This
rolling can be minimized by turning this volume.
4 High speed electronic shutter switch (SHUTTER)
5 Video output connector (VIDEO OUT: BNC type)
Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.
6 24 V AC input terminal (24 V AC, GND)
7 Lens iris level volume (LEVEL)
8 Auto-iris lens switch (DC/VIDEO)
9 Lens iris output connector (LENS)
VIDEO OUTSHUTTER
AC 24 V
EI
OFF
OFF
AI
BLC
AGC
POWER
GND
2
1
6
45
INT
LL
3
PAHSE
7
9
8
L73Q4/US GB 2001, 6, 18
4 English