Filter
Top Products
35
English
Adjusting White Balance
1
11
1
Select an area to be masked and specify “ON”.
RMasking will be applied for the area specified with “ON”.
• You can specify multiple masks. Repeat the above steps as
required.
• To disable the mask, select the area and specify “OFF”.
2
22
2
Set “MENU” to “END” and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
ATW MASKING (Masking for ATW)
ATW MASKING
PRESET OFF
MENU BACK
CENTER OFF
RIGHT OFF
LEFT OFF
BOTTOM OFF
TOP
OFF
TOP
BOTTOM
LEFT RIGHTCENTER
MEMO: • You can get an appropriate white balance by masking
an extremely bright light source or dark location.
• While setting the area, the masking is shown but is not
visible on the monitor screen.
[Settings Screen] [Monitor Screen]