Filter
Top Products
930-112-01-B.00 PowerLogic
TM
EM4800 Series
01/2011 PowerLogic configuration tool
© 2011 Schneider Electric All Rights Reserved
9
Figure 4: Discovered Units dialog box
2. Select the Load Unit Configuration check box, then click Ok. The
main configuration tool window appears populated with the current
programming information for the selected meter. See Figure 5.
3. Proceed to “Unit Field Configuration Tab” on page 10.
To connect to a meter on a different network:
1. Click Unit in the menu bar, then select Connect from the drop-down
menu. The Connect to Unit window appears. See Figure 5.
Figure 5: Connect function window
2. Enter the IP address of the meter to be configured, then click Connect.
The configuration tool main window appears populated with the current
programming information for the selected meter. See Figure 6.
3. Proceed to “Unit Field Configuration Tab” on page 10.