Filter
Top Products
PowerLogic
TM
EM4800 Series 930-112-01-B.00
PowerLogic configuration tool 01/2011
© 2011 Schneider Electric All Rights Reserved22
Pulse Probes Tab The Pulse Probes tab contains the configuration information for each pulse
input. It shows the measurement type in units for each input, and the scale
factor applied to the collected pulse counts. Figure 15 shows the Pulse
Probes tab of the main configuration tool window.
To configure a pulse probe:
1. Select a pulse probe from the Probe List.
2. Select a measurement type from the Type pull-down list.
3. Enter a value in the Scale Factor field.
NOTE: The scale factor only changes the pulse values in the TR3
report.
Figure 15: Pulse Probes tab