Sealife DIGITAL FLASH Camera Flash User Manual


 
45
Shutter speed. The amount of time the camera shutter opens to
permit light through the aperture and on the image sensor.
Fast shutter speed (125/sec and above) will stop action. Slower than
(60
th
/sec) will be blurry, unless the camera is held very steady or on a
tripod. As a general rule, use shutter speed values between 1/90 to
1/500 for underwater.
Backscatter: Fine particles of sand or plankton suspended in the
water that appear as small dots in your picture. It looks like it’s snow-
ing in the water. Move flash head as far away from camera lens as pos-
sible. Direct outer rim of flash beam at your subject, so you do not illu-
minate the water between the camera and the subject.