Filter
Top Products
VL-AH150U/pp. 007-017; 00/11/21/18:00
G. K. Associates, Tokyo
12
Preparation
Selecting the Language for
the On-screen Display
This VIEWCAM allows you to choose from
among English, French or Spanish for the on-
screen display language.
Setting the Language
When using the VIEWCAM for the first time,
select the desired language for the on-screen
display by performing the procedure below.
1 Hold down the Lock
button and slide the
Power switch to
CAMERA.
• The language selection
screen appears.
2 Press the ĭ or İ button (C or D) (Q)
to select the desired language, then
press the SET (REGLAGE or AJUSTE)
button (B) (W).
Lock button
Changing the Language
1 In Recording Standby mode, press the
MENU button until
appears.
GAMA
REW
QK
EFF
PIC
EFF
SET
ESPA
Ñ
OL
LANGUAGE
FRAN
Ç
AIS
ENGLISH
SET
TEND FADE
EX
-
Power switch
Operation buttons
MENU button
2 Press the PAGE (PAGE or PAGINA)
button (
) until MENU 2 appears.
3 Press the ĭ or İ button (Q) to select
“LANGUAGE” (“LANGUE” or “IDIOMA”),
then press the SET (REGLAGE or
AJUSTE) button (B) (W).
• The language selection screen appears.
4 Press the ĭ or İ button (C or D) (Q)
to select the desired language, then
press the AJUSTE (SET or REGLAGE)
button (B) (W).
• The menu screen is displayed in the
language selected.
SET
MENU
LANGUAGE
2
PAGETURE
PIC
-
SET
FADE
REMOTE
NORMAL
ON
DEMO MODE OFF
AUTO
5 Press the DISPLAY button to turn off the
menu screen.
Note:
• The operation procedures in the following
sections of this operation manual are based
on the use of on-screen displays in English.
TE
AJUS
IDIOMA
FRAN
Ç
AIS
ENGLISH
IMA
EF
IMA GAM
REV
RAP
EF
ESPA
Ñ
OL
TEN.
EX
-
DES
-