Filter
Top Products
Operation References
8
Note:
• N indicates a flashing display.
Displayed for
5 seconds
Description of warning
The card is not inserted or is inserted improperly. Check that it is
properly inserted (see page 13).
The capacity of the card is full and cannot store any more images.
Delete unnecessary images (see page 61) or replace the card with a
new one (see page 13).
The card has no images recorded in the format the camcorder can
recognize.
The images in the card are corrupted or recorded in a format which is
not compatible with this camcorder. Format the card to use it with this
camcorder (see page 58).
The card has not been formatted with this camcorder. Format the card
(see page 58).
The card is write-protected (see pages 13, 74).
You are trying to delete a protected image. Cancel the protection
setting (see page 60).
The selected image cannot be read by this camcorder. Format the
card to use it with this camcorder (see page 58).
The card cannot record any data due to a problem with the card or
data on the card. Replace the card (see page 13).
NO
MEMORY CARD
MEMORY
FULL
CARD
NO DATA ON
MEMORY CARD
MEMORY CARD
ERROR
FORMAT
MEMORY CARD
MEMORY CARD
PROTECTED
PROTECTED
DATA
MEMORY CARD
READ ERROR
CANNOT
STORE DATA