Filter
Top Products
59
Digital Still Camera Features
Playback
Digital Still Camera
Features
Digital Still Camera Features
Playback
Card Playback
Available mode:
CARD-VCR
You can play back and view still images
recorded on a card on the LCD monitor.
1 Set the Media Selection
switch to CARD.
2 Hold down the Lock button and set the
Power switch to VCR.
• The images recorded on the card are
displayed in a thumbnail format.
3 Press j, k, l or m on the Operation
button to move the selection frame to
the desired image.
• Each time you press j, k, l or m, the
selection frame moves as shown below.
Note:
• Holding down j or k increases the speed
of motion of the selection frame.
4 Press the SET button.
• The selected image displays in full-
screen.
Available Operations during
Full-screen Display
• You can display the full-screen picture of the
previous or next image by pressing j or k.
• When holding down j or k, you can search
through the images on the card. The search
can be very fast, so it is recommended that
the on-screen indicators turns on to display
the image number.
• To return to a thumbnail of the images, press
the SET button again.
Notes:
• Depending on the amount of data for the
recorded image, the picture quality indicator
displayed during playback may not match the
picture quality setting used during recording.
• The images bigger than 640K480, e.g. images
recorded on other equipment, display as
thumbnails, not full screen.
• Do not play back any card storing a defective
image (with noise and distortion) created on
other equipment. If you mistakingly play back
data on such a card, set the Power switch to
OFF, remove, and never use it with this
camcorder.
7
01
89
0100
-
00
2/2PAGE
1
NORMAL
PLAYBACK
1
4
2
5
3
6
1000
-
00
2/1PAGE
1
NORMAL
PLAYBACK