Sharp VL-NZ150U Camcorder User Manual


 
66
Digital Still Camera
Features
Image Folders and File Names
Still images recorded using the camcorder are
stored on a card as shown below.
DCIM
100SHARP
DVC00001.JPG
DVC00002.JPG
••••••
Note:
• In case of data transfer error, disconnect the
USB cable, then connect it again, or set the
Power switch to OFF, then set it to VCR again.
Caution on transferring data
While transferring data, the transfer indicator
moves. Do not execute the operations below.
Disconnecting the USB cable
Switching the power on/off
Turning off the PC or setting it to Standby
Opening the card slot cover
USB
Still image
Disconnecting the USB cable
Refer to the operation manual and help files of
your PC for unplugging, and make sure that the
PC permits to unplug, then disconnect the USB
cable.
Notes:
• If you copy any data incompatible with this
camcorder to the card, the camcorder will not be
able to recognize it.
• It is recommended to use the AC adapter as a
power source for extended periods of use.
Windows ME
1 “Add New Hardware Wizard” appears
after performing “Preparation”.
2 Select “Automatic search for a better
driver”.
3 Insert the CD-ROM containing the USB
driver into the CD-ROM drive, then click
“Next”.
4 Select “SHARP DVC USB Ver. 1.0”
located in the “WINME” folder of the
CD-ROM drive, then click “OK” to begin
installation.
5 Click “Finish” to complete the installa-
tion.
Windows XP
For installing the USB driver, you need to
log in as the system administrator.
1 “Found New Hardware Wizard” appears
after performing “Preparation”.
2 Select “Install from a list or specific
location”.
3 Insert the CD-ROM containing the USB
driver into the CD-ROM drive, then click
“Next”.
4 Select “Search for the best driver in
these locations.” and “Include this
location in the search:”.
5 Specify “R:\WIN2KXP”, then click
“Next”.
6 A warning window for hardware
installation appears. However, click
“Continue Anyway” to continue
installation.
7 Click “Finish” to complete the installa-
tion.
Folder of still image files
Sub-folder of still
images
Serial number
(100 to 999)
Transfer indicator