Sigma LBA-400 Digital Camera User Manual


 
Key Type Value Description
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
225
PixelBits I Number of digitized bits/pixel. Available only
when Sync Source is set to Digital.
2 = square
3 = ellipse
4 = rectangle
AutoAperture B Auto aperture enable.
A.5.2.2 CAM - set camera configuration
A path may be included in the ‘File’ parameter. If a path is included in the ‘File’ parameter then
the path where the LBA-PC looks for CAM files will also be changed.
If a ‘File’ is specified the current settings for Resolution, FrameBufferSize, NumberFrames, and
Lens are not changed.
If a ‘File’ is specified then this file is read first. Parameters such as Pixel Scale, Pixel Units,
Gamma & Lens can be specified to override the default CAM file parameters.
If ‘File’ or ‘Resolution’ is specified that is different from the current configuration then the frame
buffer will be flushed and all current frame data will be lost.
If ‘FrameBufferSize’ or ‘NumberFrames’ specified is less than the current configuration then
frames at the end of the frame buffer will be discarded.
:CAM <configuration>
1
:CAM?
2
Key Type Value Description
File3 S CAM file name.
Maximum 256 characters.
Resolution3 L Full frame video sample rate.
Maximum value depends on camera.
-1 = Full 1x
0 = 1x
1 = 2x
2 = 4x
3 = 8x
4 = 16x
NumberFrames3 I Number of frames in frame buffer
Sync Source L Camera sync source.
0 = Genlock
1 = Digital