Filter
Top Products
Type
Description
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
217
If no extension
(
i.e. no
p
eriod
)
then .CFG is
F Fixed/Floating. ASCII numeric value in fixed or floating point
notation.
S String. Series of ASCII characters. Note that the backslash,
“\” has special meaning in strings known as an escape
sequence. To specify a single backslash you must send two.
For example: “c:\\spiricon\\lba300pc\\lbapc.cfg” is
interpreted as “c:\spiricon\lba300pc\lbapc.cfg”. Although other
escape sequences are recognized, there is no reason to use
them with the LBA-PC.
T Time. ASCII numeric integer values in the form
[[HHH:]MM:]SS.
D Date. ASCII numeric integer values in the form MM/DD/YY.
A.5 LBA-PC Configuration Commands
A.5.1 File Menu
If a key is not specified with the command then the default is the last value set via restore config, or a
previous command (unless otherwise specified in the description).
Many commands can generate error messages. See the :ERR? query command for a list of error
messages
Range checking is performed on all values in key=value for each transmitted command. If any value is
invalid or out of range then the entire command is ignored and the Range Error flag is set in ELR.
All footnote references can be found on the last page of this Appendix.
A.5.1.1 LDC - restore configuration
NOTE: There is no default path for this command. If you want the configuration to be restored from a particular
path then send the path with the file name.
:LDC <configuration>
1,3
:LDC?
Key Type Value Description
ConfigFileName
6
S Name of configuration file to load.