Filter
Top Products
Figure 40
Upon opening, the above two horizontal color bars will be black. The designer can create a new
palette by placing seed colors into the upper bar and observing the resulting palette in the lower bar.
Colors on the left represent low intensities while colors on the right represent high intensities. The
upper bar contains entries for 128 individual colors, numbered from 0 on the left to 127 on the right.
You must define at least 2 colors to create a palette, or as many as 128 if you want to choose the
color of all possible displayed colors. LBA-PC uses a 128 color palette to describe all beam display
images, As you slide the mouse pointer along the upper bar a number (just below the upper bar) will
indicate which of the 128 color position is selected.
Left mouse clicking on a location in the upper bar will allow you to place a seed color at that physical
location. A Color selection dialog box will appear as shown below:
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
95