Sigma S2000HD Camcorder User Manual


 
31
More on Photography
2
Focus.
Press the shutter button halfway to focus.
3
Shoot.
Pictures will be taken while the shutter button is pressed. Shooting ends when the
shutter button is released, memory is full, or the selected number of shots has been
taken.
1 Notes
• In all burst modes except n, focus and exposure are determined by the  rst frame in each series. The  ash
turns o automatically (pg. 28); the previously-selected  ash mode is restored when burst shooting is turned
o .
• Frame rate varies with shutter speed.
• If the self-timer is used when n is selected, only one picture will be taken when the shutter button is pressed.
• At a setting of l, white lines may appear in bright areas of the image; these can be avoided by choosing m
mode.
• The number of pictures that can be recorded depends on the memory available. Brack-
eting is only available if there is su cient memory for three pictures. In all burst modes
except n, additional time may be required to record pictures when shooting ends. The
pictures are displayed in the monitor while recording is in progress.
STORINGSTORING
p Burst Mode (Continuous Shooting)