Sony 4-114-858-12(1) Camcorder User Manual


 
107
Troubleshooting
Shutter speed, gain, white balance or iris cannot be adjusted manually.
• Set the AUTO/MANUAL switch to MANUAL.
Tiny spots in white, red, blue, or green appear on the screen.
This phenomenon appears when using a slow shutter speed (p. 30). This is not a malfunction.
The subjects passing by the frame very fast appear crooked.
This is called the focal plane phenomenon. This is not a malfunction. Because of the way that
the image device (CMOS sensor) reads out image signals, the subjects passing by the frame
rapidly might appear crooked depending on the recording conditions.
The screen picture is bright, and the subject does not appear on the screen.
• Set [BACK LIGHT] to [OFF].
• Set [HYPER GAIN] to [OFF].
The screen picture is dark, and the subject does not appear on the screen.
• Press and hold the DISPLAY/BATT INFO button for a few seconds to turn on the backlight
(p. 17).
Horizontal stripes appear on the image.
This occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction. This can be improved by changing the shutter speed (p. 30).
[WORLD TIME],
[DATE REC]
Date and time are not set.
[x.v.Color] [REC FORMAT] is set to [DV].
[ECS FREQ.] The shutter speed is not set to the .
[INTERVAL REC] [REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
[REC TYPE] of [HDV PROGRE.] is set to [PROGRESSIVE].
[REC TYPE] of [HDV PROGRE.] is set to [INTERLACE] and
[SCAN TYPE] is set to [25].
[SCAN TYPE] of [DV PROGRE.] is set to [25].
[DV FRAME REC] [REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
When [REC FORMAT] is set to [HDV1080i]
[EXT REC CTRL] [INTERVAL REC] is set to [ON].
[DV FRAME REC] is set to [ON].
Cannot use Situation
Continued ,