Filter
Top Products
150
Notes
• When you press the shutter button without looking into the viewfinder, close the
eyepiece shutter with the eyepiece shutter lever.
• In Interval Timer Shooting, the drive mode is set to (Single-shot adv.). If the
focus is not achieved, the shutter is not released (except when the manual focus is
selected or [Priority setup] in the Recording menu is set to [Release]).
To start up/exit “Remote Camera Control”
x Windows
Click [Start] t [All Programs] t [Sony Image Data Suite] t [Remote
Camera Control].
To exit, click the button on the upper-right corner of the screen.
x Macintosh
Double-click [Remote Camera Control] in the [Sony Image Data Suite]
folder from the [Application] folder.
To exit, click [Quit Remote Camera Control] from the [Remote Camera
Control] menu.
2 Connect the camera and your
computer.
3 Turn on the camera and the computer, then start the “Remote
Camera Control.”
1 To the USB
terminal
USB cable
2 To the
USB terminal