Filter
Top Products
Using the shooting function
73
When shooting with the flash, you can adjust the amount of flash light
alone, without changing the exposure compensation. You can only change
the exposure of a main subject which is within the flash range.
Adjusting it toward + makes the flash level higher and adjusting it toward –
makes the flash level lower.
Notes
• If you have adjusted the flash level, appears in the viewfinder when the flash is
attached on. When you adjust it, be careful not to forget to reset the value.
• The positive effect may not be visible due to the limited amount of flash light, if the
subject is at or around the maximum range for the flash. If the subject is very close,
the negative effect may not be visible.
Exposure compensation and flash compensation
Exposure compensation changes the shutter speed, aperture, and ISO sensitivity (when
[AUTO] is selected) to perform the compensation. If the flash is used, the amount of
flash light is also changed.
However, flash compensation only changes the amount of flash light.
Adjusting the amount of flash light (Flash compensation)
1 Press the Fn button to display the Quick Navi screen (page 48).
2 Select the flash compensation
item with v/V/b/B on the multi-
selector.
Flash compensation
3 Select the desired compensation value with the front or rear
control dial.