Filter
Top Products
5
Items to be adjusted
Items to be adjusted
Camera DETAIL SHUTTER
C.SCAN
KNEE
DXC-D35/D35P Yes Yes Yes Yes
DXC-D30/D30P Yes Yes Yes Yes
DXC-637/637P Yes Yes Yes Yes
DXC-537A/537AP Yes Yes No
a)
No
b)
DXC-327B/327BP Yes Yes No No
b)
DXC-950/950P Yes Yes Yes No
DXC-9000/9000P Yes Yes Yes No
a) Clear Scan function can be used on the camera.
b) The figures displayed on the monitor screen change but
adjustments cannot be made.
Return video signal and teleprompter
signal output
Camera adaptor
Return video
signal output
Teleprompter
signal output
CA-537/537P
a)
Yes Yes
CA-537/537P
b)
No
c)
No
Rack Mounting
When the rack mount brackets (supplied) are attached
to the CCU-M5A/M5AP, the unit can be mounted in a
19-inch standard rack.
For details on rack mounting, consult your Sony dealer or
service personnel.
How to Use the Stands
Stands are provided on the bottom of the CCU-M5A/
M5AP. When the unit is used on a table, turning the
stands as shown below will allow easy operation.
Rack mount bracket
(supplied)
a) Serial number 20891 and higher (CA-537) or 52201 and
higher (CA-537P)
b) Serial number 20890 and lower (CA-537) or 52200 and
lower (CA-537P)
c) To output the return video signal, change the setting of
an internal switch in the unit. For details, consult your
Sony dealer or service personnel.
Length of the camera cable
When the CCZ-An camera cable is used
When and optional CCZ-An (n means the cable length
in meters) camera cable is used, the cable can be
extended up to 300 meters (about 999 feet). To extend
the cable, set the CABLE COMP selector on this unit
to the appropriate position according to the length of
the cable to be used.
When the CCQ-nAM camera cable is used
When the CCQ-nAM camera cable is used, the
maximum cable length is 100 meters (about 333 feet).
Stands