Sony CCU-TX7P Camera Accessories User Manual


 
Distributed by
MK4126V2OHB99APR
Printed in Japan
©1999 Sony Corporation
163 (6
1
/2)
370 (14
5
/8)
280 (11
1
/8)
230 (9
1
/8)70
15
370 (14
5
/8)
45
55
122 (4
7
/8)
26
164 (6
1
/2)5
9.5 (
3
/8)200 (7
7
/8)
140 (5
5
/8)830
354 (14)
404 (16)
29
60
70
10
424 (16
3
/4)
29
482 (19)
177 (7) 380 (15)
482 (19)
23.3
436 (17
1
/4)
49.5
155 (6
1
/8)
146 (5
3
/4)
80 (3
1
/4)
105 (4
1
/4)
42.7
22.7
10
300 (11
7
/8)
15
330 (13)
100
261.2 (10
3
/8)
14
316 (12
1
/2)
27.5
70
50
221 (8
3
/4)
220 (8
3
/4)
CCU-TX7P CA-TX7P
©1999 Sony Corporation.All rights reserved. Reproduction in whole or in part without Sony’s written
permission is prohibited.
Features and specifications are subject to change without notice.
Sony is a trademark of Sony Corporation.
The Quality Management systems in design of the CCU-TX7P, CA-TX7P, RCP-TX7, COU-TX7, RMM-TXC7
and RMM-TXR7 have been assessed and registered as meeting the requirements of ISO 9001.
SPECIFICATIONS
SPECIFICATIONS
3. RCP-TX7
Power requirements 10 to 17V (supplied from
camera or CCU)
Power consumption 4.0W
Operating temperature -10˚C to 45˚C (14˚F to 113˚F)
Storage temperature -20˚C to 55˚C (-4˚F to 131˚F)
Weight Approx.1.5kg (3 lb 5 oz)
Dimensions (W x H x D) 100 x 330 x 70mm
(4 x 13 x 2 7/8 inches)
Cable length 50m max.(with CCA-7 cable)
Supplied accessory CCA-7-5 Connecting Cable (5m)
Number plate (1set)
Screws and washers x 2
Operation manual x 1
4. COU-TX7
Weight Approx.330g (12.6 oz)
Dimensions (W x H x D) 105 x 155 x 43mm
(4 1/4 x 6 1/8 x 1 3/4 inches)
Supplied accessory Operation manual x 1
5. RMM-TXC7
Weight Approx.3.7 kg (8 lb 3 oz)
Dimensions (W x H x D) 482 x 177 x 380mm
(19 1/8 x 7 x 15 inches)
Supplied accessories Installation manual x 1
Blank panel x 1
6. RMM-TXR7
Weight Approx.2.7 kg (5 lb 12 oz)
Dimensions (W x H x D) 482 x 75 x 354mm
(19 x 3 x 14 inches)
Supplied accessories Installation manual x 1
Blank panel x 2
7. DXBK-701
Power Consumption 4.5 W
Weight 330 g (11.6 oz)
Dimensions (W x H x D) 17 x 148 x 277 mm
(11/16 x 5 7/8 x 11 inches)
1. CCU-TX7P
Input connectors GEN LOCK: BNC type, loopthrough,
VBS/BS, 1.0Vp-p, 75ohms
RETURN (1,2): BNC type, loopthrough,
VBS, 1.0 Vp-p, 75ohms
PROMPT (prompter): BNC type, loopthrough,
VBS, 1.0 Vp-p, 75ohms
PGM IN: XLR 3-pin x 1
Output connectors VBS (1,2): BNC type, VBS, 1.0 Vp-p, 75ohms
(*1)Y/R-Y/B-Y (1,2): BNC type,
Y: 1.0Vp-p, 75ohms
R-Y/B-Y: 525mVp-p, 75ohms
(*1)R/G/B (1,2): BNC type,
700mVp-p, 75ohms
(*1)Y/C (1,2): BNC type,
Y: 1.0Vp-p, 75ohms
C:300mVp-p, 75ohms
(*2)SDI (1,2): Conform to serial digital interfase
(270Mbs), 0.8 Vp-p, 75
SYNC: BNC type,
VBS, 0.3 Vp-p, 75ohms, negative
PIX (picture monitor): BNC type,
1.0 Vp-p, 75ohms
WF (waveform monitor): BNC type,
700 mVp-p, 75ohms
(Encoded output:1.0 Vp-p, 75ohms)
WF MODE: 4-pin x 1
MIC OUT (CH-1/2): XLR 3-pin x 2,
0dBu/-20dBu balanced, 2 channels
Camera control CAMERA: Triax (Fischer type) x 1
input/output COAX: BNC type x 1
connectors REMOTE: 10-pin
INTERCOM/TALLY: D-sub 25-pin x 1
4W/2W
TALLY: 24V DC, TTL level or
contact selectable
INTERCOM (Front): XLR 5-pin x 1
RTS: XLR 3-pin x 1
RS232C: D-sub 25-pin x 2
Power requirements AC 220 to 240V or DC 10.5 to 17.0V
Power consumption 95W max.
Cable length 1500m max.(ø14.5mm)
Operating temperature 5˚C to 40˚C (41˚F to 104˚F)
Storage temperature -20˚C to 55˚C (-4˚F to 131˚F)
Weight Approx.8.45 kg (18 lb 10oz)
Dimensions(W x H x D) 218 x 169 x 415mm (8 5/8 x 6 3/4 x 16 3/8 inches)
Supplied accessories AC power cord x 1
Plug holder for AC power cord x 1
Number plate (1 set)
Operation manual x 1
(*)Note: 1) These CCU output signals can be selected to be R/G/B or Y/R-Y/B-Y or Y/C.
2) Using optional DXBK-701 (SDI output board)
2. CA-TX7P
Input/output connectors CCU: Triax (Fischer type) x 1
Pro 76P Digital or
Pro 50P switchable
CAMERA INTERFACE: XLR 3-pin x 2, 600ohms, balanced
MIC IN (CH-1/2)
Input level :Mic in: -60dB
:Line in: -20dB
DC IN: XLR 4-pin x 1,10.5V to 17V
DC OUT: 4-pin x 1, 10.5V to 17V, Max 12W
PROMPTER OUT: BNC type x 1, 1.0Vp-p, 75ohms
RETURN OUT: BNC type x 1, 1.0Vp-p, 75ohms
INTERCOM/PROGRAMME: XLR 5-pin x 1 (for Headset)
Input level: -60dBs (dynamic)
Output level: to 12dBs
DATA OUT: 10-pin x 1
DC 0 to 5V (analogue) x 4
DC 0 or 5V (digital) x 2
Power requirements DC 120V (from Triax connector) or
DC 12V (10.5 to 17.0V) (from DC IN connector)
Power consumption
Operating temperature -10˚C to 45˚C (14˚F to 113˚F)
Storage temperature -20˚C to 55˚C (-4˚F to 131˚F)
Operating humidity 20% to 90%
Weight Approx.2.7 kg (5 lb 15oz)
Dimensions (W x H x D) 226 x 221 x 131mm (9 x 8 3/4 x 5 1/4 inches)
Supplied accessory Operation manual x 1
DC 120V DC 12V
(Supplied from triax connector) (Supplied from DC IN connector)
CA-TX7P Total CA-TX7P Total
internal only internal only
CA-TX7P only 10.5W 10.5W 7.5W 7.5W
w/DXC-D30P,
DXF-701CE
11.2W 26W 7.5W 22.3W
w/DXC-D30P,
DXF-51
12.3W 35W 7.5W 30.2W
unit: mm (inch)