Filter
Top Products
137
Customizing Your Camcorder Uw camcorder naar eigen inzicht aanpassen
Changing the menu settings
Icon/item
OTHERS
DATA CODE*
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
VIDEO EDIT
EDIT SET
Meaning
To display date, time and various settings during
playback
To display date and time during playback
To set the clock to the local time. Press r/R to set a
time difference. The clock changes by the time
difference you set here. If you set the time difference
to 0, the clock returns to the originally set time.
To output the melody when you start/stop
recording or when an unusual condition occurs on
your camcorder
To output the beep instead of the melody
To cancel the melody and beep sound
To activate the Remote Commander supplied with
your camcorder
To deactivate the Remote Commander to avoid
remote control misoperation caused by other VCR’s
remote control
To show the display on the LCD screen and
viewfinder
To show the display on the TV screen, LCD screen
and viewfinder
To light up the camera recording lamp at the front of
your camcorder
To turn the camera recording lamp off so that the
subject is not aware of the recording
To make programmes and perform Digital program
editing (p. 99)
To adjust and set the synchronicity of your
camcorder and a VCR for dubbing in Digital
program editing
POWER
switch
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
CAMERA
VCR
VCR
Mode
zDATE/CAM
DATE
——
zMELODY
NORMAL
OFF
zON
OFF
zLCD
V-OUT/LCD
zON
OFF
——
——
* Using the Remote Commander only
Note
If you press DISPLAY/TOUCH PANEL with “DISPLAY” set to “V-OUT/LCD” in the menu settings,
the picture from a TV or VCR will not appear on the LCD screen even when your camcorder is
connected to outputs on the TV or VCR.
In more than 5 minutes after removing the power source
The “PROGRAM AE”, “AUDIO MIX”, “COMMANDER”, “HiFi SOUND” and “WHT BAL” items are
returned to their default settings.
The other menu items are held in memory even when the battery is removed.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is close. In this case, we recommend you set REC LAMP to OFF.