Filter
Top Products
Recording
34
4 Touch .
To cancel the operation
Touch [END SCH] again.
b Note
• The END SEARCH function will not work correctly
when there is a blank section between recorded
sections on the tape.
z Tip
• When the PLAY/EDIT mode is selected, you can do
this operation.
Searching manually – EDIT
SEARCH
You can search for the start point while
viewing the pictures on the screen. The sound
is not played back during the search.
1 Slide the POWER switch to select the
CAMERA mode.
2 Touch to display [PAGE1].
3 Touch MENU.
4 Select (CAMERA SET), then
select [EDITSEARCH] with /
, then touch [EXEC].
5 Select [ON], then touch [EXEC].
6 Touch .
7 Keep touching (to go
backward)/ (to go forward) and
release it at the point where you want
to start recording.
Reviewing the most recently
recorded scenes – Rec review
You can view a few seconds of the scene
recorded just before you stopped the tape.
1 Slide the POWER switch to select the
CAMERA mode.
2 Touch to display [PAGE1].
3 Touch MENU.
4 Select (CAMERA SET), then
select [EDITSEARCH] with /
, then touch [EXEC].
5 Select [ON], then touch [EXEC].
6 Touch .
7 Touch once.
The last few seconds of the most recently
recorded scene are played back. Then, your
camcorder is set to the standby mode.