Filter
Top Products
Other functions
38
DCR-PC330/IP1
3-084-946-11(1)
G:\BackUP(E)\PC(3084946111)\0729PC_GB\3084946111\3084946111_PC\01US05ADV.fm
master:Right
1 Start up the computer, and double-
click [ImageMixer Ver.1.5 for Sony]
displayed on the desktop.
2 Click (Capture Environment).
3 Click (DV Camcorder Capture
Mode).
z Tip
• You can also use the USB cable to connect your
camcorder and computer for converting signals.
Click (USB Device Capture Mode) in this case.
4 Click (Preference), check
[Capture using DV Cam.] in [DVC
Capture settings], then click [OK].
5 Connect your camcorder to the
computer using an i.LINK cable
(optional), then connect it to a VCR
(analog equipment) using the A/V
connecting cable (supplied).
b Note
• When you connect your camcorder to a
computer, make sure you insert the connector in
the correct direction. If you insert the connector
forcibly, it may be damaged, and causes a
malfunction of your camcorder.
6 Prepare the power source for your
camcorder, then slide the POWER
switch repeatedly to select the PLAY/
EDIT mode.
7 Touch [P-MENU], [MENU] and [A/
VtDV OUT], then touch to select
[ON].
For details, refer to the separate Camera
Operations Guide supplied with your
camcorder.