Filter
Top Products
39
Advanced Recording Operations
Using the fader function
When the OVERLAP, WIPE or DOT indicator appears
Your camcorder automatically stores the image recorded on a tape. At this stage, the
picture may not be recorded clearly, depending on the tape condition.
While using the bounce function, you cannot use the following functions:
– Exposure
– Focus
– Zoom
– Picture effect
Note on the bounce function
The BOUNCE indicator does not appear in the following mode or functions:
– D ZOOM is set to 20× or 120× in the menu settings
– 16:9 wide
– Picture effect
– PROGRAM AE
While in MEMORY mode
You cannnot use the fader function.