Filter
Top Products
72
Recording video or TV programs
Using the A/V connecting cable
You can record a tape from another VCR or a TV program from a TV that has video/
audio outputs. Use your camcorder as a recorder.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder. If
you are recording a tape from the VCR, insert a recorded tape into the VCR.
(2) Set the POWER switch to VCR.
(3) Press MENU, then set DISPLAY in
to LCD in the menu settings (p. 89).
And press EXIT to return to FN.
(4) Press FN, then select PAGE3 (p. 16).
(5) Press REC CTRL.
(6) Press REC PAUSE.
(7) Press N on the VCR to start playback if you are recording a tape from VCR.
Select a TV program if you are recording from TV. The picture from TV or
VCR appears in the viewfinder or on the LCD screen.
(8) Press REC START at the scene where you want to start recording from.
5
REC
PAUSE
REC
START
4
FN
68
REC
CTRL
PAGE1 PAGE2 PAGE3 EXIT
DATA
CODE
REC
CTRL
REC
PAUSE
REC CTRL
RET.
AUDIO/VIDEO
S VIDEO
VIDEO
AUDIO
OUT
S VIDEO
REC
START
: Signal flow