Filter
Top Products
54
Searching a recording by date
– Date search
You can automatically search for the point where the recording date changes and start
playback from that point. Use a tape with cassette memory for convenience. You need
the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
Searching for the date by using cassette memory
You can use this function only when playing back a tape with cassette memory (p. 125).
(1) Set the POWER switch to VCR.
(2) Press FN to display PAGE1 (p. 16).
(3) Press MENU, then set CM SEARCH in
to ON in the menu settings (p. 89).
Default setting is ON.
(4) Press SEARCH MODE on the Remote Commander repeatedly, until the date
search indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
(5) Press . or > on the Remote Commander to select the date for playback.
Your camcorder automatically starts playback at the beginning of the selected
date.
To stop searching
Press x on the Remote Commander.
2
FN
1
POWER
LOCK
VCR
MEMORY
CAMERA
OFF
5
4
SEARCH
MODE
DATE SEARCH
DATE SEARCH
1 S E P / 5 / 0 0
2 S E P / 6 / 0 0
3 D E C / 2 4 / 0 0
4 J A N / 1 / 0 1
5 F E B / 1 1 / 0 1
6 A P R / 2 9 / 0 1
1 S E P / 5 / 0 0
2 S E P / 6 / 0 0
3 D E C / 2 4 / 0 0
4 J A N / 1 / 0 1
5 F E B / 1 1 / 0 1
6 A P R / 2 9 / 0 1