Filter
Top Products
74
Recording video or TV programs
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (not supplied) to DV IN/OUT
and to DV IN/OUT of the DV products. With digital-to-digital connection, video and
audio signals are transmitted in digital form for high-quality editing.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder,
and insert the recorded tape into VCR.
(2) Set the POWER switch to VCR.
(3) Press MENU, then set DISPLAY in
to LCD in the menu settings (p. 89).
And press EXIT to return to FN.
(4) Press FN, then select PAGE3 (p. 16).
(5) Press REC CTRL.
(6) Press REC PAUSE.
(7) Press N on the VCR to start playback.
(8) Press REC START at the scene where you want to start recording.
5 4
FN
REC
CTRL
REC
PAUSE
REC CTRL
RET.
REC
PAUSE
REC
START
68
REC
START
PAGE1 PAGE2 PAGE3 EXIT
DATA
CODE
REC
CTRL
S VIDEO LANC
DV
DV IN/OUT
: Signal flow
(not supplied)
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Using the Remote Commander
In the step 6, press z REC and the button on its right simultaneously, then immediately
press X. And in the step 8, press X at the scene where you want to start recording from.