Filter
Top Products
Quick Start Guide
11
PLAY PB
POWER
CAMERA
MEMORY/
NETWORK
VCR
OFF
(
CHG
)
POWER
CAMERA
MEMORY/
NETWORK
VCR
OFF
(
CHG
)
Recording a still image on a “Memory Stick”
(p. 135)
When you purchase your camcorder, the clock setting is set to off. If you want to record
the date and time for a picture, set the clock setting before recording (p. 20).
NOTE
Do not pick up your
camcorder by holding the
viewfinder, the flash, the LCD
panel or the battery pack.
Monitoring the playback still images on the LCD
screen (p. 165)
1Set the POWER switch to
MEMORY/NETWORK
(DCR-TRV950 only)
or VCR while pressing the
small green button.
2Press PLAY or PB. The last recorded
image is displayed.
1Remove the lens cap.
3Press OPEN to open
the LCD panel.
The picture appears on
the screen.
Viewfinder
When the LCD panel is closed, use the viewfinder with your eye
against the eyecup.
Adjust the viewfinder lens to your eyesight (p. 30).
2Set the POWER switch to
MEMORY/NETWORK
(DCR-TRV950 only)
while pressing the small
green button.
4Press PHOTO
lightly.
You can start
recording when the
small green button
on the screen stops
flashing, and lights
up.
5Press PHOTO
deeper.
The image while
pressing the
button deeply is
recorded on the
“Memory Stick.”
or